0:00
quick tip on drilling through bolts in
0:02
your van if you want to mount pull out
0:05
slide trays like this
0:08
so it can be difficult to locate Where
0:10
to drill the holes because the cross
0:12
members in the van chassis so what you
0:15
want to do is find a hole that you've
0:16
cut so that you can reference off of or
0:19
find the corrugations because they
0:21
actually translate through the other
0:22
side and you can measure off of them
0:25
once you've found your location go ahead
0:27
and drill through to the other side and
0:29
then you're going to go underneath the
0:31
you'll be able to see your drill bit
0:34
and you can continue to reference off of
0:36
this if you need to now keep your drill
0:39
bit here because I'm going to show you
0:40
the next step the final step is get your
0:42
three bolt size so take a marker mark
0:45
the top of the drill bit go back under
0:48
your van measure the distance from the
0:51
bottom of the drill bit to the top of
0:53
the chassis so five and three quarters
0:56
finally measure the difference and you
0:58
now have your three bolt size
