Up next in 10
Van Builder HQ is live! (Heavy duty drawer slide mount)
1 views
May 3, 2025
Whenever you’re ready, there are 2 ways we can help you: 1. If you need a vetted parts list, download our → FREE DIY Van Build Cheatsheet to help you save time and money on Van Parts and Gear: CLICK HERE: https://van-builder-hq.ck.page/846c83ab54 2. If you want to get Done-For-You Van Build help, book a → FREE Consultation with my Calendly Link: CLICK HERE: https://calendly.com/odysseycustomvans/intro-call?month=2023-07
View Video Transcript
0:00
let's turn this camera around here here we go hey guys we'll just wait a couple
0:05
seconds for this to go live all right it's been a minute we're
0:11
updating you on status of Glacier with the upgrades um excited that I have finally
0:20
got the draw slide mounting rails installed um I'm installing them right
0:26
now that's why I wanted to go live and show you guys how to install heavy duty drawer slides in a awkward area so what
0:35
I mean by that is if you have an area like the back of your van or something where the fittings that come with the
0:41
heavy duty drawer slides so let's say the screws
0:48
um let's just spin the camera around here all right so let's hop in the van
0:56
so right here we have um this is what I'm installing so we've got these heavy duty drawer
1:02
slides they're really Overkill they're 500 lb but I wanted to have these in
1:08
here so that um uh when Brian and Robin get into the
1:15
bed this is a dual purpose box so it's a storage box to add more storage to the
1:20
van and it's also a step so it's a locking step so you can get in and out of bed without having to use a stool so
1:27
what I've done here and this is is what's going to be a challenge with this video is um let's show you what we're
1:35
working with so this is the back of the kitchen Galley so we've got our microwave water
1:42
pump drain so all the plumbing is done it's just I been I took it out so I can
1:48
have room to work on everything we modified the bottom drawer we're going to box that in um later and then uh
1:56
we've already got the box built so basically what we're doing is adding one more storage
2:02
box this is the box over here just waiting for the paint to dry um and then we're going to sand and
2:10
uh I'm going probably clear coat the inside because I like the inside of these boxes to be wood um the black to
2:18
be paint um these screws are just holding the epoxy in and then they'll be painted
2:26
black so everything looks nice and neat um but what this is this is that rig hexa material super
2:32
durable um and then there's going to be a lid so this is the rahexa so it's a
2:40
textured uh it's a quinch Baltic Birch that's got this injected molded plastic
2:47
on the back and the front and basically what I'm going to do is there is a lid
2:58
here so so this believe it or not this is part of the lid
3:05
so you guys can
3:11
imagine so we take this lid and this is going to be inset into here so it goes
3:17
like that and so what's it going to look like here in a second is Imagine This
3:24
lid is like this and then on the underside if you flipped it over you would have this
3:31
piece of wood epoxied in the center so once this gets
3:37
epoxied to here this is a lid that goes on top of this
3:42
box and so since we don't have it glued yet let's just kind of show you what it looks
3:49
like so the way that this will function is this will have the drawer slides
3:54
mounted here so these are the mounting holes and what this box is is this box
4:00
will pull out you can open it'll have a little hole cut in here you can lift the
4:05
lid and then inside you've got additional storage this is under the microwave and
4:11
then when you put this on this will just sit in the place
4:17
flush so it won't be moving around I'm going to put felt on the bottom so it doesn't rattle or anything like that
4:22
we'll be painting the sides all that good stuff the point is this is a nice traction surface so when this pulls out
4:29
out from underneath the uh microwave think of this as what you're going to
4:35
step on so if I grab a shoe here you know you're going to pull this
4:42
out and then in this direction you'd be able to walk up onto this platform and
4:48
then into the bed so get a visual of what this looks like this box so again it's a storage
4:56
box this is removable lid this goes underneath the
5:01
microwave the left and right hand side of the drawer slides so to get this Dimension box this
5:08
is what I wanted to kind of teach you today is to get this Dimension box
5:14
um we needed to measure uh where our drawer slides are
5:20
going to go so for example there's a couple layers here so
5:26
this first part is the this bottom drawer so let's look at this from two angles this is the
5:33
back side and then if we hop in the
5:38
van this is the inside so you can see here we've already got um this is just
5:44
the standard Flatline V go drawer that comes with the system and then what I've done is I've
5:51
taken these spacer blocks and these spacer blocks are the exact height I
5:56
need the drawer to be so it clears this piece of uh aluminum that's part of the
6:03
cabinet so I put that in that gives me about eighth of an inch um slightly less
6:08
than an eighth of an inch of clearance and then I can actually me push this all the way
6:16
in there we go so these will be removed but this is what I wanted to show you
6:21
today so this side is already bolted in and so if you want to put a drawer slide in a van uh you can see it gets kind of
6:29
complicated there's a bunch of holes maybe you don't know which one to use or you don't actually
6:36
know I mean see there's a ton of holes so which ones do you use how can you
6:41
mount this and the last question would be you know how do you even access these
6:47
holes when this slide is coming in and out so there's these little if you can
6:52
see here if I push this up there's these little windows and these windows will move down
7:00
uh the drawer slide and then all you got to do is just line it up make sure draw slide's unlocked but
7:07
just line this hole up and once it gets lined up you'll be able to move
7:14
this and then see where that bolt is so you want to make sure that the
7:20
bolt head clears but you do have access to get to the mounting bolt here and the mounting
7:26
bolt back here whatever you choose um these are qu inch 20 bolts so they're
7:32
plenty of strength but this is your locking drawer slide so when you put it
7:38
in see that locks the drawer um but you're going to need to
7:45
have a spacer on the bottom for your drawer height so build your drawer
7:50
box and then your drawer box is going to be this inside width so this inside
7:56
width here to this side okay so here's where I teach you how to do it so if you
8:03
have a cabinet this one is it's got bamboo on the inside and it's got um
8:08
this on the outside so we already drilled through the cabinet so this is extremely strong over
8:14
here you got half an inch solid bamboo and you got 8 in aluminum uh panel kind of bonded
8:20
together this side we just have the/ in bamboo but I've been using bamboo a lot
8:25
and this solid bamboo it's very very strong so I don't really have to worry about it and what I've done is I've uh cut sized
8:34
and painted and then this little white you see right there where it's not painted that is my indicator Mark so
8:40
these spacers what I do is I put a little stamp on the front so that tells
8:46
me this is the front and then um on the back I make sure that this is the front
8:52
right or this one over here is the front left spacer so to start the process of
8:58
leveling this drawer slide out what you want to do is get the bottom of the drawer lined up so
9:05
this is the bottom of the drawer get your spacing so this is so that the
9:11
drawer will actually clear it won't hit this and it standardizes the height so
9:17
that we have and I've measured it I've got 8 in with a/ quar inch to spare so
9:22
that it don't hit underneath the microwave remember under here I'm going to be adding some bolts
9:31
um to this wood supporting the microwave the wood's not really supporting the microwave we're actually
9:37
going to we have these drilled and tapped Allen screws we'll get to that later I'll finish it up tomorrow but um
9:46
so we got that going on so this is our base now our sides so now we need to
9:51
take this piece that we created and
9:57
uh finder little Dot where' It Go okay there's our DOT so that little
10:02
depression goes up here in the front just like
10:08
that okay and it's going to mount all the way to the front flush to the front I've already
10:14
pre size all this so if we look here you can see there's the hole so
10:20
it's perfectly it's in perfect alignment right there see that so that's
10:26
perfect and you do that by using a clamp clamp it now I've already preone this
10:32
before I painted it but now we're in the install process so I wanted to show you
10:37
this in case you wanted to actually do this so we got our spacers next we're
10:44
going to add the drawer slide rail now before you do the drawer slide rail you
10:49
actually need to take this rail out this is a uh this is a cumbersome
10:55
process but um the end result I'm very excited for so that's why
11:01
I'm that's why I'm doing this uh so let's see this is our box and
11:07
this is our rail so the flat flush side is going to go inside the cabinet the
11:13
more open side is going to go towards the drawer and so what I did was I went
11:18
ahead and closed this hold
11:24
on stay with me okay so what I did is
11:30
I've got the drawer slide and I moved it up to the drawer and I kept this flush on the
11:38
front and then I went through and I just located with a pencil I just said hey I
11:43
want this hole this hole and this hole for my supports cuz you don't want to go into the wood obviously you want to bolt
11:51
this into a drawer you do not want to use screws especially if you're going to use it as a step that would be um insane
11:58
to do that the next step is you want to take a
12:03
square and then the square this is not a square but I'm use this for visual
12:09
reference take a square line it up to the outer of the hole and then flip it over do the other
12:17
side and then you just want to mark on the inside here and then when
12:23
you flip it you mark on the other side and once you do the left and right of each hole
12:30
you're going to have these left and right markings and then you're just going to take a center punch find the
12:35
center punch it down and then you're going to be lined up to this hole now
12:40
there is a possibility that once I get this whole thing put together I'll need to maybe open up these holes a little
12:46
bit that's I'm okay with that what you this going into the actual
12:54
van structure that is what you're not going to be able to
12:59
adjust so if we come back in here what we've done is we've figured
13:05
out our box holes now we're going to be figuring out um now we go back to where
13:13
we know the other holes are we got our bolts um I had to order some more bolts
13:19
cuz uh they sell these in 1 in these are quarter2 they sell them in 1 in uh inch
13:26
and a half 2 in they do not sell it in inch and 3/4 so I special ordered some they'll be here
13:32
Tuesday um but I need to get the drawer I need to get all this mounted so that I
13:38
can knock out the plumbing tomorrow so I can stay on schedule all right so what we're going to do
13:44
is we're going to unlock the dra slide I'm trying to see if I can do this
13:51
onehanded and if you guys have questions feel free to ask so what I've done is
13:56
I've opened the drawer slide until I can see right there and I'm going to take my
14:01
bolt I'm just going to put it in there now obviously you need to make sure you have a bolt head that will
14:09
clear and this one clears um just
14:14
clears but that's okay we're going to be fixing these bolts Tuesday
14:24
um okay let's see onehanded give me one second
14:30
hold on standby okay this next one is going to
14:36
go back here in the adjustable
14:41
slot which is right
14:47
here okay and then we're going to take it and we should be able to
14:53
just I don't think I'm going be able to do this holding the phone so you guys hang
15:00
out right here for just a
15:12
second okay so now I've got the door slide in
15:18
on this side and then on this outside I've got the bolts this one will be showing we'll
15:24
probably paint it black um there's a back bolt that'll be hidden behind the water
15:31
system so yeah so we're going to put that in
15:37
um stay with me here on the stream because I'm going to tighten this down and then I'm going to slide the box into
15:44
here and then that way you guys can actually see what this uh it'll make sense once the box box gets in
15:52
here so let's set this phone up like that
16:13
so I wanted to use these acorn nuts but the problem
16:19
is um well actually they actually might
16:24
work
16:34
think if I add one more washer to this side we might be
16:53
okay okay it looks like
16:59
see here if we added think we add two washers we're
17:04
going to be may not have to use those bolts we ordered which will be good
17:29
okay let me check this one more time okay so one washer awesome so not so only two
17:37
washers and we can get this nice and flush you want to use the acorn washer
17:42
because it's just going to look better
18:00
so that's the one that is the acorn washer I don't know if you guys can see it but um yeah like that washer and the
18:08
location of this box you know some things in Vans you're just going to there there is a compromise
18:16
um again while we're doing this make sure you use all stainless steel components so let's go ahead and tighten
18:22
this up um and while I'm doing this uh so Rod
18:28
the finish on the cabinet this is a powder coated aluminum and believe it or not this one
18:35
flatl vanod changed their process so when I ordered this cabinet it was a
18:41
matte black powder coat um like the bed these bed
18:49
rails and so what I did is when since I modified this and took the drawers out um I took it to a local powder coater
18:56
and they matched it and they did a really good job so I'm really excited about that for future
19:02
modifications um but yeah it's powdercoated aluminum uh you can actually find a local powder coater uh
19:08
it doesn't matter if it's still aluminum they should be able to help you out stainless um but yeah let me set the
19:15
phone down and I'm going to tighten tighten this up and then we can
19:23
actually Slide the slip the drawer in
19:30
and that is going to be pretty
19:35
exciting yeah so the goal tonight is just to get this drawer Hardware in place
19:41
because um uh I need to make sure that I don't
19:48
have to access this anymore so I can move on now these spacers keep these spacers in this whole time you're
19:53
putting this in cuz we really need to make sure that we uh keep our
20:00
level on this drawer
20:33
okay so here's the Moment of Truth for this side so it looks like we're doing good I
20:39
don't think I'm going to have to yeah this is going to be just great
21:06
okay heck yeah so now these
21:11
things we got our locking 500lb drawer
21:19
slides okay so check that out so here's your
21:25
locking how you lock and unlock it so you unlock this pulls out with the
21:33
drawer and then when you lift
21:46
up get this one here so when you lift up this locks into
21:53
place so this one okay now they're locked so see they're both locked into place and the drawer is going to go in
22:00
between these so when you're doing drawer slides you need to have this room
22:05
here so see how my hand so if I have a box here if this is too close to the refrigerator I won't be able to
22:12
disengage this so you want to make it so you can still put your hand down here and for these you're going to need to
22:17
touch both of them at the same time so make sure you have room for your hand
22:22
and then when you push them down it'll go in and so you don't have if you're going
22:29
to be moving it in and out a lot you don't have to fully lock it so you can
22:35
push the drawer in but if you do want to fully lock it you have to depress it and that's going to lock it
22:42
in so let's get our drawer box and just do a test
22:53
fit again we still got to make our lid but I'm just doing this so I can show you guys
23:00
give you some content since we've been not online for the last
23:10
week so this box is additional storage and a step don't worry about that I'm
23:16
going to sand and clean this out um so if I pull this
23:23
back I open the drawer slides Okay so there's our maximum
23:31
opening now you'll notice that the drawer is
23:38
not let's see
23:46
here so you notice that the drawer doesn't go all the way back and that's because we have Plumbing in the
23:54
back but really if we come out forward this this part of the drawer with the microwave sticking out we're
24:01
not going to step on that we're not going to put our foot in in here anyway it's going to be right there in the
24:06
middle so this is just a step so you can see the size of my shoes this is the step to get into the
24:13
bed and it acts as extra storage so now if we take our
24:24
box and as you know how I do this stuff this is a perfect
24:32
fit um I need to let me move the spacer in the back so the drawer doesn't
24:39
fall so see this is our plumbing for our drain so our drain has got the cut out
24:47
here and then we get these little
24:53
spacers okay so now all we got to do is we can kind of uh pick up our box from
25:00
the other
25:06
[Music] side
25:12
okay see our box is going to be nice and flush and that rig of hexa on the
25:18
outside again these are all going to be painted black um but that rig of hexa is going to match the other rig of hexa in
25:25
the van um so how do I keep the microwave from falling out excellent question that will
25:32
be probably in tomorrow's video but right now the microwave is actually let
25:38
me pull these so give me one second Rod I'm going to finish this thought and then
25:44
I'll go into the next
25:53
one okay okay so there you go
25:59
so see how awesome that looks so this is a Overkill drawer that is going to allow
26:06
Ryan and Robin to get in and out of the bed and have some additional storage
26:11
um I built this because uh a stool is very simple but visually
26:20
this is nice nice and open and I I don't want them to I don't want them to have a stool this is just this is what I
26:26
envisioned when I originally designed this van um before they bought it and uh
26:31
yeah I'm just knocking this out right now but um tomorrow we'll show it with a lid on and I'll show you at getting in
26:37
the bed because I'll actually probably start putting the bed panels back in um so here there's that okay Rod's question
26:45
was how do we keep the microwave from falling out so first off these top two
26:51
screws and these bottom two they're going to be bolted into the frame of
26:56
this kitchen Galley and technically that's what holds it but this is a dual
27:02
purpose microwave and if we come to the back of the van here you can
27:08
see that I mean not Dual Purpose um well yeah it has
27:13
feet so the feet are resting on this platform and so this
27:19
platform is just aluminum 2x two aluminum and that aluminum is there um
27:27
so that you know we got our clearance for our drawer down here at the
27:32
bottom and this is so the drawer doesn't hit into this now I could
27:39
have you know cut this out and made it more space but it just it gets too
27:44
complicated too quick so trying to keep it simple this had to be cut but remember not only do we have
27:50
these drain lines coming in we're going to be modifying this and we're going to have so the water pump is here
27:58
which is really nice um I had the water pump
28:04
uh before I finalized this in the back of the van which didn't really make any sense
28:10
um but we have the water pump here we're going to do a whole saw that's all
28:16
allows all of our water line so we'll have a water line coming in so we have a hot and cold coming in and then that'll
28:22
come up here to the sink and then we'll have another line come back it'll be a
28:27
return turn line going back out it's not really a return line it's just an additional line coming back out and
28:34
that'll be for the rear shower um so all that stuff's mocked up and ready to go it just needs to be
28:40
bolted in so um this is just Cable Management nothing wild here it's just I unbolted
28:48
this so that I could get these uh uh mounts for the put the drawer
28:55
slides in so yeah we're going to finish that lid of the box and then um bolt
29:03
everything up and uh knock this out what's nice
29:08
about if you design your microwave water pump plumbing on the back side of this
29:14
is you can take this panel off which is just got these uh threaded
29:20
holes and that's going to allow you to do your maintenance on the van so if you
29:26
needed to replace or you need to clean out your strainer you can just take your strainer off clean it out replace your
29:31
water pump um it just gives you access access to your plumbing your drain
29:37
instead of it you can work on it from outside the van instead of inside which gets kind of tight um and I don't know
29:44
if you guys if I told you guys before but I did refinish the tops of these um
29:50
and I installed this uh Outlet over here
29:59
so that's really nice in case you want to do blender all that good stuff um
30:05
right here with this dot is I got a special bit that's where I put
30:11
uh this right here this it's a pretty expensive special bit it's designed for
30:18
almost like a Millie machine kind of thing but it's for drilling through uh
30:24
heavy steel for a hole and that hole is that we can plug in one of
30:30
our water pump on and off switches so it's located right here it's convenient
30:35
so the whenever you want to water you just push the button on pump comes on push the button off pump turns off so
30:44
simple very simple one place access for water on and off and uh yeah keeping
30:51
this van highend but also simple um
31:00
yeah so I mean the sink faucet the plumbing is probably only going to take a day just a full day to uh just run the
31:08
pecs um it's just nice and simple one thing in the back here that we are doing
31:14
is uh the water tank came out so that I can access these two holes where that
31:21
tape is that's going to be cut out for the PEX lines uh we've got everything
31:26
ran for the water tank so
31:32
um once the water tank gets in we're going to connect everything and we already got this staged so these are the
31:41
uh this is all the aquar parts aquar is very expensive uh some people don't want
31:48
to buy it because it is expensive I mean this water inlets like almost 90
31:55
bucks and this right here I get from uh Timber Vans which is formerly Titan DIY
32:01
van kits.com um but I like this cuz they pre cut out the this little recess blank
32:10
you have your shower head your scandic mixing valve and uh probably the most important
32:17
thing about this kit is this piece of plastic right here
32:22
if you don't have this special adapter these things are almost they're impossible
32:28
to Plum so by buying this from uh temper Vans DIY kits or Titan Vans DIY kits
32:35
whatever they're called um by purchasing that as a kit I don't have to waste time
32:42
putting all this together but these guys are going to sit beside each other just like that they're going to sit right
32:49
here and uh like I said um I'll film all that because that's a that's an easy
32:55
install and then um tomorrow we're going to bolt this to the we're
33:03
going to bolt this 8020 rail we're going to drill it out and this whole entire structure will be bolted into the
33:10
chassis of the van via the adventure wagon side um so once that's in there we'll
33:16
have three additional Fasteners just for this bottom and then we got two along
33:22
the sides um and this 8020 cage is not going anywhere so it just becomes part of the
33:30
van um so after this gets finished cleaned up water faucet goes in clean up
33:38
the wiring we just put three bed panels on cover this bolt it up and then we'll
33:43
be doing probably a day solid day of just testing the van um I charge the
33:50
batteries up all the way so I'm actually in the process of trying to drain them back down to 50 Cent 50%
33:58
uh just to test all the systems but um I mean everything else in the van the
34:03
Weeoo I mean everything is is done except uh just the plumbing here
34:10
but um the reason I'm working this weekend is just I needed to get this box
34:15
knocks knocked out tonight uh before I headed out but yeah that is uh little update on
34:22
the van um so the countertop rod is two pieces
34:29
of/ in solid bamboo that's glued together to create a 1-in
34:37
countertop um it's a very expensive countertop a 4x8 4x8 sheet of this
34:44
bamboo this solid bamboo um let's see the best way to do the math
34:51
is uh so underneath here I've got some remnants of a 3/4 in
35:00
sheet 3/4 in sheet um yeah it's expensive so a/ inch seat
35:07
sheet I think is like almost 200 bucks and then 300 bucks for the
35:15
3/4 I think it was to ship two for to ship one 4x8 sheet of half inch and one
35:21
for8 sheet of 3/4 inch um from Cali bamboo that's about the only place you can get it that's a
35:28
reputable dealer um it cost probably with shipping maybe almost
35:35
$640 um or maybe 50040 I have to go check but it's
35:42
beautiful it's just uh it's really expensive but this came with Flatline
35:48
van Co when you buy the cabinet you get this whole you get this whole bamboo setup you get two
35:54
drawers and then you get all this and it's it's beautiful construction so it's
36:00
uh it's powder coated on the outside um and then they bolt they screw
36:05
in the panel from the inside and then it's just it's a really nice uh stuff to work on
36:15
um yeah but uh this will be really exciting because you're going to see again like
36:21
everything come together really quick um
36:29
yeah so thanks so much for the questions uh don't forget guys we have the uh the
36:36
DIY van build cheat sheet that we are doing um so that is a cheat sheet it's
36:42
essentially an Excel sheet with uh the last three years of all my Amazon purchases online and that cheat cheat
36:49
sheet is completely free um it's really just a sheet to help you guys look for Van parts so anything that's come to the
36:56
shop that I've bought and it's been delivered here is on that sheet I've got more items I got to update all the time
37:02
but that is the DIY van build cheat sheet and then also I'm launching a new
37:08
course it is the uh the van build
37:13
course and um let me hop over here on the computer CU I'm not on my live stream rig and uh
37:21
I've got to go look at my copy here
37:30
so if you go to Van Builder hq.com so this is the uh this is the DIY V
37:36
build cheat sheet I was talking about so that is free it's just a cheat sheet for you guys to uh download and
37:43
get help with your van build but the new course is coming out a van build
37:49
course so it's called the camper van conversion blueprint it is a DIY camper van conversion course it is uh put
37:57
together by myself and it outlines all the different aspects that
38:03
I always talk about on the channel um everything from getting started choosing your van design and layout offgrid power
38:09
system fresh and gray water storage instulation sound dampening exterior upgrades final your build so all these
38:15
modules are going to be included in the course and uh what's really cool is you're going to get access to our online
38:21
community which is a forum that I'll be on answering questions uh but what's really exciting
38:27
is this is launching October 1st but if you guys go ahead and purchase the
38:33
course today which is preordination
38:57
from the the channel the live stream the YouTube all that good stuff um and then it's going to have uh questions that
39:05
I've asked van customers that I've had that whole process we'll talk about you know how they got their financing um
39:13
what they use to save up MoneyWise as far as doing a budget for their builds
39:18
um and then we'll go over actual uh not invoices but the actual van build budget
39:25
so every customer that I do we have a budget that we put together and um we chip away at that and kind of reorganize
39:31
things and really tighten up what uh the customer wants versus what is best for
39:37
the build and then find the uh Main musthaves and then what we can do away
39:43
with and get you be be more flexible um because when you do a custom
39:49
van build you kind of want everything and uh sometimes the budget doesn't allow for that but that doesn't mean you can't have a really nice van build
39:58
so doing DIY van build same thing you know you can find out what really
40:03
matters to you and then focus on that and then I can show you how um I pick
40:10
other things that can still get you across the Finish Line as far as build wise and still have you enjoy the van uh
40:18
one module that I'm probably going to put in there um or one that's coming out soon is uh I'm going to talk a little
40:25
bit about a past trip that I recently did so I went to uh sturge South Dakota for
40:30
the bike rally but along that trip I stayed at four KOA Campgrounds I took my
40:36
personal van and I did that trip so uh along that trip I started to think of a
40:41
lot of uh answering a lot of questions that you guys may have um going to camp grounds um booking them staying at them
40:49
what facilities they have uh you know hauling equipment to campgrounds whether
40:55
you're trailering something you got a motorcycle in the back of your van like I did
41:02
um just all kinds of stuff so if you guys have questions about particularly staying uh like at KOA Campgrounds or
41:10
travel questions in General on how to actually get in your van and go on a trip I'm going to be covering that up
41:15
and covering that in a future video so you know put those questions in the comments below if you have a particular
41:21
question about a trip you want to take and you're not kind of sure what that looks like um I'm sure that'll be a
41:28
module that might add to this course but uh yeah love to hear your questions also love to hear any
41:34
suggestions on topics that you uh may want to have covered in the course I've
41:40
got a standard outline right now that I'm already putting together as far as answering questions for but if there's
41:46
something on here that is not that you don't think is going to get answered just put that in the uh comments and I
41:53
will I will add that as a additional topic to the um the course
42:00
itself but yeah so you can check this all out van Builder hq.com
42:06
the DIY van build cheat sheet you guys can get that today for
42:12
free just put your name and email address and then what you can also do is
42:19
the van course you can pre-order that by clicking this link right
42:25
here you get a discount for ordering it early and then yeah comes out October
42:33
1st so all right what else I think that's it
42:38
for today's live stream um I'll be on here for another minute to see if you guys have any other
42:46
questions um but that's pretty much going to do it for our drawer slide
42:51
little tutorial we'll do a follow-up video talking about how it actually functions when I actually get the lid on
42:57
on I'll show you me getting in and out of the bed and show you why it's a I
43:02
think it's a cool idea um yeah so it doesn't look like we had
43:08
any other questions again thank you guys that are watching so much for checking out the channel make sure you guys are
43:13
subscribed hit that like button share this anybody that is needs some information on drawer slides or any
43:19
topics like that um yep Rod I'll see you tomorrow just uh make sure you guys turn on that
43:26
notification Bell so so you don't miss when I'm going live I go live live random throughout the week and um yeah
43:32
by tomorrow we should have all this stuff painted installed um with the drawer slides in the van and then we'll
43:40
show you that test it out um once that's in then I can actually start Plumbing
43:45
the lines because I'll know where everything can go and not go but um yeah
43:52
that's it for this live stream again thank you guys for watching and we'll see you in the next one
#Cabinetry
#Campers & RVs
#Construction & Power Tools
#Countertops
#Home Furnishings
#Home Improvement
#Living Room Furniture
#Small Kitchen Appliances